Basic Info.
Model NO.
12m2 Disaster Relief Single Tent
Usage
Party, Camping Tent, Traditional, Beach Tent, Advertising Tent, Relief
Pole Material
Flexible Poles,aluminium Alloys
Application
Relief for The Refugee
Transport Package
Carry Bag and Carton with PE Rolled
Specification
94.5KG, 0.63CBM
Product Description
Product Description
Category | Parts name | Unit | Quantity | Marks |
1 | Outer shell | pc | 1 | Disaster relief dedicated 12m2single tent (canopy body) Quantity: 1 Piece Quality: 29 Volume: 600x500x350 Production date: ZD4m×3m-2012-11 |
| pc | 1 |
Instruction book | pc | 1 |
∮6mm Rope | Length 5m | pc | 2 |
Length 3m | pc | 6 |
2 | General pole | pc | 18 | 12m2single tent for disaster relief (poles, accessories) Quantity: 1 Piece Quality: 36.5 Volume: 2100×200×200 Production date: ZD4m×3m-2012-11 |
Ground pole | pc | 2 |
Vertical pole | pc | 6 |
Ground pole connector | pc | 6 |
Connector | pc | 3 |
End frame connector | pc | 6 |
Wire rope | Bundle | 3 |
Triangle stake | pc | 8 |
Accessories bag | pc | 1 |
Carry bag | pc | 1 |
Certifications
Installation Instructions
Three Erection
1. Open the single canopy packaging bag and the frame packaging bag, take out the product packaging list and count the quantity of each part.
2. Take 8 universal rods and three groups of end frame tee and middle frame tee that have been pressed and fixed with steel wire rope to form three groups of herringbone frames connected and connected.
3. Take 4 universal rods, end frame tee and middle frame tee to form a frame.
4. Place the canopy on the three sets of herringbone frames and adjust the position.
5. Take 6 vertical poles and insert them into the end frame tee and the middle frame spool respectively, and use 6 people to support the canopy at the same time, and connect it with the ground poles that have been placed.
6. Tighten the straps at all parts, fasten the nylon zippers, and adjust the tent position to connect with the rods of the frame.
7. Drive the triangle pile in the corresponding position on the ground, fix the rope, adjust the tightness, and put the rubber-plastic pile head cover on the end face of the triangle pile.
8. Tidy up the tent and bury it with soil around the tent.
Four. Withdrawal
1. The retraction process of the tent is opposite to that of erection. When retracting, refer to the erection method and steps in reverse order.
2. When folding a single canopy body, fold it according to the size of the canopy body packaging bag and put it into the packaging bag.
3. After checking the tent poles and parts according to the packing list, put them into the tent pole packaging bag in turn.
Company Profile
Our Advantages
After Sales Service
Precautions for use and maintenance1. When erecting and retracting, do not drag the single canopy on the ground to avoid soiling and tearing, causing unnecessary damage.2. During use, pay attention to keep the inner and outer tarpaulin clean.3. After rain, snow and strong wind, check the top of the tent and the surrounding ground for water, snow and loose ropes, etc., and clean and adjust it in time to ensure that the tent is in normal use.4. The wet tent is not allowed to be stored for a long time. It must be aired and dried in time before packing and storage.5. The tent parts shall not be used for other purposes.6. The packaging bag of the tent should be properly stored with the tent and must not be lost for recycling.7. During the use of the tent, if any damaged parts are found, they should be replaced in time.
Address:
No. 1 Building, Reemployment Base, Northern Industrial Zone, Haigang District, Hebei Province, Qinhuangdao City, China.
Business Type:
Manufacturer/Factory
Business Range:
Apparel & Accessories
Company Introduction:
Different kinds of products are available in our company. We′re pleased to get your Inquiry and we will reply you as soon as possible. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective.