Basic Info.
Usage
Party, Camping Tent, Traditional, Beach Tent, Advertising Tent, Relief
Pole Material
Flexible Pole,fibreglass
Application
Outdoor Emergency
Transport Package
Carton and Iron Frame
Specification
118KG, 0.9cbm
Product Description
Product Description
Chapter One Overview
This tent is a mesh-type sanitary tent (HD-40 type), which is used by troops to open field hospitals, command posts and special tents for professional teams such as confidential and communication. The tent shape is shown below:
Figure1-1.
Chapter 2 Structure and Working Principle
The skeleton of the grid-type medical tent (HD-40) is composed of thin-walled aluminum alloy tubes and hubs to form a folding space grid. The space grid (Figure 2-1) consists of several rectangular basic folding units. The basic unit (Figure 2) -2) It consists of 4 pairs of side rods and 4 pairs of spoke rods riveted in the middle; one end of each pair of rods is marked with color, divided into four types: red, yellow, blue and green. The respective rod ends are connected together. When retracted, all rods can be folded into a bundle, and when unfolded, the hub of the rectangular center connecting 4 sets of spoke rods is self-locked through a "dead" point out of the plane, thereby forming a stable force-bearing member, making the tent reliable. bearing performance.
Figure 2-1 Basic unit of support structure
Figure 2-2 Folding space grid structure
The tarpaulin is divided into inner and outer layers, which are connected with the skeleton by fixing bolts. The outer tarpaulin is camouflage coated cloth, and the inner tarpaulin is white coated cloth. A stable air inter layer is formed between the inner and outer canopies, and the coating material is used to have low emission The thermal physical properties of high reflectivity and the thermal insulation performance of the air inter layer significantly improve the thermal environment quality in the tent, so that the tent has good thermal insulation; Accessories to fix the tent.
tructure | folding net frame structure |
Color | Camouflage/ olive green/ customized |
Size | 11.8x4.1m |
Top height | 3.16m |
Side height | 1.54m |
Layer | Double layers |
Outer layer fabric | 220D waterproof PVC coated oxford cloth, 200g/m2, |
Lining fabric | 150D silver coated oxford cloth, 140g/m2 |
frame | aluminum alloy folding net frame |
Door | 4,1.7x1.2m |
Window | 8,2.76x0.5m6,1.2x0.5m2 |
Ventilation opening | 10, diameter 38cm |
Mud flap | 25cm |
Ground sheet | 1000D PVC, 400g/m2 |
Transparent PVC window curtain | 6 at size 2.85x0.59m, 2 at size 1.29x0.59m |
Detailed Photos
Certifications
Installation Instructions
Global Customers
Company Profile
As a leading shelter tent expert, Qinhuangdao Junqiang Equipment Clothing Co., Ltd.(Short for JQ Tent) is located in the beautiful coastal city- Qinhuangdao. The company was founded in 2001. Our company was originally a domestic joint venture optimized and reorganized after the restructuring of the 324th Factory of the Chinese People's Liberation Army.We have inherited the excellent management system, and carried forward the fine tradition of the older generation of military industry's hard work. Our company has strong technical force, complete product testing methods, and reliable quality. It has successfully passed the ISO9001: 2000 quality system certification. It has obtained the right to import and export foreign trade products and is a designated manufacturer of all kinds of shelter tents for the customers around the world.
OUR COMPANY IS A MANUFACTURER OF QUALITY TENT THAT CAN SERVE MANY PURPOSES INCLUDING SHELTER FOR MILITARY PURPOSES. OUR HEAD OFFICE IS AT No.1 building reemployment base, northern industrial zone, Qinhuangdao, China
WE HAVE LEARNT OF YOUR GOOD OFFICE INTENTION FOR A CONTRACT SUPPLY OF TENT FOR MILITARY PURPOSES, HENCE WE TAKE THIS LIBERTY TO INTRODUCE OUR COMPANY AS ONE OF THE LEADING EXPORTER OF GOOD QUALITY AND DURABLE TENT.
WE CAN SUPPLY THE REQUIRED QUANTITY OF TENT WITHIN A VERY SHORT PERIOD PROVIDED WE RECEIVE UP FRONT PAYMENT WITHIN 50% BY T/T OR 60% ADVANCE PAYMENT. WE ARE CONFIDENT THAT WE CAN UNDERTAKE THE CONTRACT FOR THE SUPPLY OF YOUR REQUIREMENTS.
MY NAME IS William ,I AM THE DIRECTOR/CEO OF Sales MY MOBILE NUMBER IS 18633500955 FOR EASY CONTACT AT ALL TIME.
WE ENCLOSE HEREWITH OUR PROFORMA INVOICE COVERING THE TOTAL TENT PROJECT AND OTHER VITAL INFORMATION AND DOCUMENTS OF OUR COMPANY FOR YOUR STUDY.
WE HOPE YOU WILL FIND FAVOR IN OUR OFFER AND AWARD THE CONTRACT TO US FOR YOUR PROJECTS ACROSS THE WORLD.
WE ARE LOOKING FORWARD TO HEAR GOOD NEWS FROM YOUR ORGANIZATION.
Our Advantages
In addition to producing military products for many years, the company has continued to expand the international market. It has been exported to the United States, Germany, Japan, the Middle East and other countries, and has been well received by users and headquarters. In particular, he has made contributions to major activities such as combating natural disasters, emergency procurement of war preparations, military field training, and responding to emergencies.
The company's products mainly include all kinds of military tents, disaster relief tents, civilian tents, cotton tents, all kinds of backpacks, carrying equipment, ponchos, sleeping bags, gun jackets, gun jackets, tower clothing, folding camp beds, folding tables and other equipment products.
We can make our promises: to win the trust of the customers with excellent military quality, and to win the trust of the people with excellent product quality. Our tenet is "honesty, quality first, and benefit sharing". We sincerely welcome new and old customers at home and abroad to patronize.
After Sales Service
The tarpaulin is divided into inner and outer layers, which are connected with the skeleton by fixing bolts. The outer tarpaulin is camouflage coated cloth, and the inner tarpaulin is white coated cloth. A stable air inter layer is formed between the inner and outer canopies, and the coating material is used to have low emission The thermal physical properties of high reflectivity and the thermal insulation performance of the air inter layer significantly improve the thermal environment quality in the tent, so that the tent has good thermal insulation; Accessories to fix the tent. The names of the components are shown in Figure 2-3.1.Outer layer 2.Hub 3.Window 4.Ropes 5.Folding grid 6.Inner layer7.Ground floor 8.Door 9.Wire hole 10.Heater duct interface 11.Stake 12.WindowFigure 2-3 Tent structure diagramChapter 3 Features and Parameters The grid type medical tent (HD-40 type) has a top height of 3.16m, an eaves height of 1.54m, an outer width of 4.10m, an inner width of 3.50m, and a usable area of 37.28M2. The plane size of the tent is shown in Figure 3-1.Figure 3-1 Schematic diagram of tent plan2. It can be used normally under 8-level wind or 8cm snow load; it can be used in the south and north, and can be erected and withdrawn around the clock; it can meet the needs of different users such as accommodation, office, command, and medical treatment as needed.3. The main body of the tent is integrated, and the entire tent can be erected or withdrawn within 10 minutes. Chapter 4 OperationThe tent erection and retraction requires 8 people, who are under the unified command of one person, so that the entire erection and retraction process can be coordinated. Before erecting a tent, you must read the "Product Instruction Manual" and be familiar with the tent erection and removal process. According to the requirements of the manual, the operators should divide the labor and positioning, take their own responsibilities, and strictly implement the operating procedures to ensure that the tents are unfolded, folded and moved smoothly. Uncoordinated operations are strictly prohibited to avoid damage to the tent. Erection (the erection step diagram is attached)1. Select a location. According to the size of the tent used, remove gravel and debris and level the site.2. Open the packaging bag, take out and unfold the ground cloth (the top side of the ground cloth is facing up), place the tent in the center of the ground cloth, with the outer tarpaulin on the top, the long side of the tent is parallel to the long side of the ground cloth, remove the strapping tape . (As shown in Figure 1)3. One person on each of the two short sides and three persons on the two long sides. Grab the outermost hub (as shown in Figure 2) (be careful not to grab the poles), lift the tent off the ground and walk backwards (as shown in Figure 3) to stretch the tent as far as possible.4. During the above operation, the operator's actions should be coordinated, and every two or three steps back should check whether there are no obstacles on the ground and whether the pull rope is entangled with other hubs. Make sure all hubs are packed in a straight line. (As shown in Figure 4)5. Each person takes an erection pole and stands at the door. At the inner tarpaulin door hole, find the hub indicated by the red sign arrow. below the hub. When erecting the HD-40 type, the four people should support the erection pole to the middle hub of the tent (with a red sign). The four people at the entrance move the erection pole alternately and inwardly to the second sign with a unified password. the hub and support the tent. (As shown in Figure 5 and Figure 6)6. Check and clean whether there is a tarpaulin wrapped around the frame, whether the Velcro on the tarpaulin is tied with the ground cloth, and other obstacles that prevent the tent from unfolding. (As shown in Figure 7)7. The personnel return to the position of the erection pole, and under the unified password, raise the erection pole in a coordinated and uniform manner to lift the tent (it is strictly forbidden to hold the skeleton poles around the tent to lift the tent) until the four walls are upright and the tent is fully unfolded. (As shown in Figure 8)8. Adjust the tent so that it is aligned with the ground cloth. If it is moved to a smaller size, hold up the tent at the door opening and move it to an appropriate position. If the moving position is large, you must use the support rod to stand against the marked hub (when the tent is lifted up), lift the tent and move it to a suitable position.9. Arrange the floor cloth and straighten out the mopping cloth inside and outside the tent.Gently lift the tent, drag the inner canopy into the canopy, and lay it flat between the floor cloth and the floor cloth edge. Hang the hook on the edge of the floor cloth into the wire rope loop on the corresponding fixing bolt at the bottom of the tent frame, and paste the Velcro around the edge of the floor cloth with the Velcro at the lower part of the inner tarpaulin side wall. .10. Lay the awning mopping cloth flat on the outside of the tent, and thread and lay the hook pile at the place where the outer tarpaulin mopping cloth has the aluminum canopy ring and the ground bra ring together with the wire rope ring of the fixing bolt there. Fix the ground cloth and the tent frame, so that the tent frame and the ground cloth are positioned. Press the soil and fix the gutters around the tent.11. Make the ground pile and tighten the rope.12. Install window glass and close temporarily unused doors. Clean up the site, and put the temporarily unused accessories and bags back in the box to avoid loss.Withdrawal (withdrawal step diagram is attached)1. Remove the pulling ropes on all the ground piles, and wrap the pulling ropes and coil them well; clean the pressed soil on the external wall mopping cloth, and pull up the small hook piles that fix the ground cloth and tent frame.2. Remove the floor cloth edge strip from the tarpaulin in the tent, fold it flat on the floor cloth, and remove all hooks between the floor cloth and the skeleton. Remove window glass, close curtains, and tie up all door curtains.3. Starting from the long side, pull the side wall outward in pairs in pairs. Check for and remove obstacles preventing tent retraction. (As shown in Figure 1)4. One person on the short side and three people on the long side (as shown in Figure 2) grab the outermost hub (as shown in Figure 3), and pull it outward under a unified command to make the entire tent fall. (As shown in Figure 4)5. Under the unified command, grab the hub to lift the tent and move it to the middle to fold the entire tent. Straighten the tarpaulin and tuck the exposed tarpaulin into the skeleton, check to straighten the drawstring so that the hub is exposed. (Be careful not to step on the tarpaulin below during the move) (as shown in Figure 5)6. Turn the tent over to straighten the tarpaulin so that the hub is exposed. Tie a strapping tape at 40cm below the hub (as shown in Figure 6), one person should tie it, and others should squeeze the tent to tie it tightly (pay attention to evenly squeeze all around), and then flip the tent and tie the other in the same way. one end. (As shown in Figure 7)7. Lift the tent from the floor cloth, fold the floor cloth into a long strip about 1.4m wide, lay the tent down on the floor cloth, roll the tent, roll up the floor cloth, and compact it while rolling so that the ground Wrap the tent tightly. (As shown in Figure 8)8. Stand up the tightly wrapped tent, with one end of the inner tarpaulin facing upwards, one person grabs the ground cloth, and the others wrap the packaging bag. Turn over the package body, insert the erection rod, tie the bag mouth tightly, and tie the outer strapping tape. (Note that one side of the manual is on the long side)9. Put the ground pile bag, window glass and other accessories into the accessory bag.10. Put the tent bag and its accessories into the packing box and cover the packing box.Combination use of tentsEach tent accessory package of this tent series is equipped with a set of internal and external connection channels for combination, which can connect two tents at the position of the door. Two or more tents can be combined together to form a tent group as needed.Figure 4-1 Schematic diagram of the combination of grid-type professional maintenance tents1. CombinationSince any two tents can be combined together, there are various combinations of tents, as shown in Figure 4-1. The combination method is determined according to various factors such as the number of tents, terrain, and heating methods required by the use requirements.2. Combination erection methodAccording to the determined combination, complete all types of tents. When erecting, first take out the ground cloth and lay the ground cloth according to the combination method. The positions of the ground cloth doors are opposite and about 300 mm apart. Set up the tents and make them in place respectively. If one side is not in place, adjust the position of the mobile tent and the ground cloth properly, so that the connecting channel is connected and stretched flat. Reconnect the inner channel. If there are many tents in combination, the tents should be connected one by one in a certain order, and the inner and outer door curtains should be bundled at the same time. Organize each tent.3. Withdrawal of the combined tentWhen withdrawing a group of tents, first clean the tents to make them movable according to the previous steps.Detach the connection channel for each tent, fold it and pack it into its own accessory bag. Move the tent roof by roof, leaving enough space for retraction. Gradually withdraw tents one by one.Chapter 5 Maintenance Maintenance1. During use, pay attention to keep the tent clean.2. After rain, snow or strong wind, check the pull rope and ground pile in time and clean up the accumulated water and snow in time.3. Coordinate and unify in the process of erection and withdrawal. Do not hold the poles to lift or move the tent, so as not to damage the poles and pinch hands, and promptly clear the obstacles that prevent the tent from unfolding.4. The wire rope loop in the tent is for hanging sporadic objects, and heavy objects cannot be hung.Maintenance1. Minor repairsIn the process of erection and use, if a rod is broken, it must be repaired in time. When the damage is in the middle of the intermediate connecting rivet and the end of the rod, minor repairs can be carried out.(1) Use a special wrench to remove the outer fixing bolts of the damaged rod attachment, lift the outer tarpaulin, and find the damaged rod.(2) Use a pipe cutter to cut off 2 cm from both ends of the damaged part, put the repair sleeve on the damaged rod, and make the damaged part of the rod in the middle of the sleeve. Secure one end of the repair sleeve with tape.(3) Install the outer tarpaulin and properly tighten the fixing bolts.OverhaulIf the broken part of the rod is at the two ends or the middle connecting rivet, and it cannot be repaired with the casing, the rod must be replaced. When replacing, confirm the marking color of the rod and replace it with the same rod.(1) Put down the tent, remove the fixing bolts to lift the tarpaulin, and find the damaged poles. (Most at both ends and doorways.)(2) Loosen the hub attached to the damaged rod. Remove the damaged rod. Take a pair of rods with the same marked color, insert the new rod into the hub according to the same position and direction as the original rod, check whether all rods on the hub are in place, and tighten the screws on the hub.(3) Turn the tent upside down, remove the damaged pole in the same way, and install the new pole.(4) When all damaged rods are replaced, install the tarpaulin.Chapter VI Transportation and Storage1. In the process of transportation and erection, when the tent is transported without a box, it must be lifted and transported, and it cannot be dragged on the ground to avoid damage to the tent.2. The tent frame is a thin-walled aluminum alloy tube. Long-term storage and long-distance transportation without an outer packing box are strictly prohibited. If the outer packing box is damaged during use, do not step on, press, and handle with care when loading and unloading the truck, and do not use a certain point of the tent as a support point for prying and loading and unloading. One end of the tent cannot be landed first, and the tent must be placed parallel to the ground at the same time. (As shown in the picture for loading and unloading the tent)
Address:
No. 1 Building, Reemployment Base, Northern Industrial Zone, Haigang District, Hebei Province, Qinhuangdao City, China.
Business Type:
Manufacturer/Factory
Business Range:
Apparel & Accessories
Company Introduction:
Different kinds of products are available in our company. We′re pleased to get your Inquiry and we will reply you as soon as possible. We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective.